DNI Scan

Technical Specification

Features

  • Duplex scan desing
  • Automatic suck ID card
  • Supports BMP, JPGE format

Features of Application

  • It was two positons sensors which can detect the ID card and control the transmission mechanism to make the ID card go forward or backward. And the ID card will be out from tehe same side where it inserts
  • Inside of the scanner, there are two image sensors, this enable the scanner to scan the both sides of ID card in single time.

Technical Specifications

  • Scan type: A8 size of a standard card
  • Maximun scanning size: 54mmx87mm
  • Card thickness: 0.75mm~1.25mm
  • Scan Component: CIS (Contact Image Sensor)
  • Light Source: RGB
  • Resolution: 300dpi, 600dpi
  • Bit depth: 8-bit
  • Image format:BMP, JPEG
  • Interface:USB 2.0 high-speed
  • Feeding mode: Stepper motor
  • Card inhalation time:  Less tahn 1 second
  • Typical scan time: Less than 4 seconds
  • Noise al Work: Less tahn or equal 55 dD
  • External power supply: DC Ppower supply (12V/1.5A)
  • Life 1One million times

ENVIRONMENTAL SPECIFICATIONS

Operating
  • Operating Temperature : 0 ~ 50ºC
  • Humidity: 20 -80 % HR, non-condensing
  • Dimensions: 175mm(L)x126mm(W)x92mm(H)
[printfriendly]